Garage Door Problems You’ll Most Likely Encounter
It can be quite annoying when garage doors suddenly decide to stop working. There are many reasons why this happens. Some of the most common issues have simple garage repair solutions that you can do yourself. But for problems that require a specific skill, like garage spring repair, it’s best to leave them in the hands of trained garage door replacement technicians.
Common garage door problems you can fix on your own
This article is going to help you correct certain problems without having to call a certified technician to fix garage door.
• Garage door isn’t closing completely.
Are you having trouble closing your garage door all the way?
Check the safety sensors for anything that’s blocking them. These electronic eyes near the door’s base need to have a clear line-of-sight so the door will work properly.
Aside from that, you should take a look at the close limit switch, which tells your door when to stop moving. This can cause the door to stop abruptly if it’s not set correctly. You can ask your garage door company for the correct settings.
You should also look into the rollers. If they are a bit rusty, you can use a silicone lubricant to ease the motion. But if they are damaged beyond repair, you will need to hire a garage door opener repair man.
• More noise than usual.
A screeching, squeaking, or grinding sound when you open or close your door in garage can be a case of lack of lubrication, particularly in the rollers and tracks. Rusty parts can be treated by applying a lubricant directly to where it is needed.
If it’s not in the manual, contact your garage door opener installation company about the best lubricant to use.
• Remote control isn’t working.
You hit the button on the remote and your new garage door doesn’t budge one tiny bit.
Before you think about calling your garage door service and repair, make sure you are within range when you operate the door with the remote. If you’re too far away from the antenna, the door might not pick up the signal. Therefore, it’s not responding to what the remote is trying to do.
If that didn’t solve the problem, try operating the door with the wall switch. If it works, then it’s highly likely that the problem is with the remote.
Replace the batteries of the remote and try operating it again. Ask your garage door suppliers the kind of batteries to buy. If there’s still a problem, then you may need to replace the device altogether. Have your garage installation company look into it to make sure.
• Wooden part of the door is warping (or has already warped).
If that is the case, it can cause the garage door opener to stop working or to not open or close completely.
Over time, wood can warp, causing your door to malfunction. If this is what’s causing the problem, you can correct this by shoring up the door by making an X pattern with tension rods on the inner side of the door. But if it’s impossible for you to do on your own, you should call on a garage door service company right away.
• A spring (or springs) is broken.
A broken spring is one of the major reasons a new garage door opener fails. It’s an integral part of the door’s opening mechanism, which means that your door won’t be able to operate as normal if this part is broken.
One of the most telling signs that you have a broken spring is when your door lifts but only a few inches off the ground. Another sign that you have a problematic spring is if the top of the door is bent. Also, if it makes a screeching or annoying sound, it can also be an indicator of a broken spring.
It’s not safe to take any chances and forego having your garage door checked by a professional. Be sure to get in touch with a garage door spring repair man immediately.
• Door reverses before closing.
If you have a garage door opener that was manufactured after 1993, it will have a sensor that prevents it from closing on a person, pet, or object. In other words, it detects any obstruction and instructs the door mechanism to stop and reverse.
But if you notice that your garage door reverses back to the open position without any obstruction, then you should check if the sensors on either side of the frame are aimed at each other correctly. If they are and your door is still reversing without any aid, then you have to make sure to have it checked by a garage door repair near me.
• Garage door seal is broken or loose.
If your door’s weather stripping or seal is broken or loose, it will let water, dirt and debris, and insects into your garage. You can easily replace the seal with a new one. You can find weather stripping at local stores. Look for garage-specific kits with adhesive.
To replace the worn out seal, you must first disengage the door from the automatic opener. Then, make sure the weather stripping fits the door’s width. Next, fold it and slide it into the bottom of your garage door.
Doing this doesn’t necessarily require an expert in garage door installation. But if you are not sure how to go about it, it would be wise to contact a professional to fix garage door opener.

It pays to call on an expert

Some home garage door repair may be easy and doesn’t require expertise. But there are problems that are best left in the hands of a garage opener installation company.